close

취급제품

Others

Merck Dräger Bischof + Klein Furupla Bioclean Texwipe Skin Angel Gloves Others
Merck Dräger Bischof + Klein Furupla Bioclean Texwipe Skin Angel Gloves Others

Aervent–50 Disposable Filters with Hydrophobic Aervent Membrane

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility.

For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent-50 filter is integrity tested during manufacture.

fileAervent_50_Cartridge_Filters.pdf fileAervent_50_test_manifold_2008_project_GL_Feb_2009_withDesign_specifications.pdf fileAervent®_50_Capsule_Filters.pdf fileBubble_Point_Test_Method_Using_Aervent®__0.2_μm_Hydrophobic_Membrane.pdf fileMTGR_Integrity_testManifold3_june_2007.pdf fileParallel_HydroCorr_Testing_Aervent50_Devices_compressed.pdf
리스트    Print

Typical Applications

• Sterile venting of vessels and carboys

• Autoclave vacuum break lines

• Low volume sterile filtration of non-aqueous fluids

• Small fermenter inlet and exhaust gas filtration


Materials of Construction

Housing : Polypropylene

Filter : Hydrophobic Polytetrafluoroethylene (PTFE)

Filtration Area : 19.6 cm²

Maximum Inlet Pressure, bar (psi) : 4.1 bar (60 psi) @ 25 °C

Bacterial Retention : Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta (ATCC® 19146) per ASTM® F838-83 methodology

Bacterial Endotoxins : Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test

Gravimetric Extractables : ≤1.0 mg in 70/30 % IPA/water

Sterilization : 10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable

Integrity Test - Bubble Point : ≥1100 mbar (16 psig) nitrogen with 60/40 % IPA/water


Typical Air Flow Rate

image10.jpg

Aervent-50 (MTGR 050) Air Flow Rate


주문 정보

Aervent-50 filters · 100/Pk

카탈로그 번호 Connections (Inlet/Outlet) Diameter Length
MTGR05000 Hose for 4 to 9.5 mm I.D. latex tubing and Female Luer slip 6.2 cm (2.4 in.) 7.1 cm (2.8 in.)
MTGR15000 19 mm (3/4 in.) Sanitary Flange 6.2 cm (2.4 in.) 5.5 cm (2.16 in.)
MTGR25000 One side: 19 mm (3/4 in.) Sanitary Flange. Other side: Hose for 4 to 9.5 mm I.D. latex tubing and Female Luer slip 6.2 cm (2.4 in.) 6.3 cm (2.48 in.)
MTGR65000 One side: 3 mm (1/8 in.) NPTM. Other side: Hose for 6.5 to 9.5 mm I.D. silicone tubing 6.2 cm (2.4 in.) 5.3 cm (2.1 in.)
MTGR75000 3 mm (1/8 in.) NPTM 6.2 cm (2.4 in.) 5.7 cm (2.24 in.)
MTGR85000 Hose for 6.5 to 9.5 mm I.D. silicone tubing 6.2 cm (2.4 in.) 7.2 cm (2.84 in.)

Aervent-50 filters · 10/Pk

카탈로그 번호 Connections (Inlet/Outlet) Diameter Length
MTGR05010 Hose for 4 to 9.5 mm I.D. latex tubing and Female Luer slip 6.2 cm (2.4 in.) 7.1 cm (2.8 in.)
MTGR15010 19 mm (3/4 in.) Sanitary Flange 6.2 cm (2.4 in.) 5.5 cm (2.16 in.)
MTGR65010 One side: 3 mm (1/8 in.) NPTM. Other side: Hose for 6.5 to 9.5 mm I.D. silicone tubing 6.2 cm (2.4 in.) 5.3 cm (2.1 in.)
MTGR75010 3 mm (1/8 in.) NPTM 6.2 cm (2.4 in.) 5.7 cm (2.24 in.)
MTGR85010 Hose for 6.5 to 9.5 mm I.D. silicone tubing 6.2 cm (2.4 in.) 7.2 cm (2.84 in.)

Related Products

q